CI-Base

Product Description

CI-Base (Crack Isolation Base) is a dry blend, polymer-modified, portland cement-based material specifically formulated as base coat for embedding mesh in the Omega Crack Isolation System (CIS). NOTE: Not for use with EIF Systems.

Basic Uses

CI-Base is a base coat for the Omega Crack Isolation System. It may be used as a leveling or patching material over approved substrates.
NOTE: Not for use with EIF Systems.

1. One coat stucco 2. Brown coat 3. Masonry 4. Poured-in-place and/or tilt-up concrete

Downloadable Files

Product Data Sheet | SDS

Related products

  • Read more

    StyroGlue Plus Base

    Acrylic-based, Water-Resistant Adhesive and Base Coat

    StyroGlue Plus Base is a 100% polymer-based, fiber reinforced, water-resistant base coat and adhesive, which is field mixed in a 1:1 ratio by weight with portland cement meeting ASTM C150. StyroGlue Plus may be used as an adhesive and base coat for AkroFlex EIF Systems and EPS foam shapes. StyroGlue Plus is highly water-resistant and can be used as a secondary water barrier.
    Product Page | Product Data Sheet | SDS

  • Read more

    Travertino

    Cementitious Decorative Finish

    Travertino is a cementitious interior/exterior finish manufactured with integral color and a mixture of various size aggregates designed to achieve a variety of sedimentary stone appearances, such as travertine, limestone, and sandstone. Travertino can create a pitted look like that of classic Tuscan stone or can be troweled/ground to achieve a smooth stone appearance. Designs can also be carved into Travertino during application and can be used to cast special shapes. Travertino an excellent choice to create a beautiful, warm sedimentary stone appearance with a lower cost, lower weight, and shorter lead time than real stone.
    Product Page | Product Data Sheet | SDS
  • Read more

    OmegaCoat Cementitious Fog Coat

    Cementitious Fog Coat

    OmegaCoat (Fog Coat) is a spray-applied cement-based, water-soluble, pigmented coating, which cures to become an integral part of the stucco surface and maintains original finish characteristics. It is an economical method to achieve color uniformity and to enhance or refresh the appearance of existing stucco.
    Product Page | Product Data Sheet | SDS

  • Read more

    FoamTek

    Polymer-modified Cementitious Adhesive and Base Coat

    FoamTek is a dry blend, polymer-modified, portland cement-based material specifically formulated for coating and attaching architectural EPS foam shapes to approved substrates. It is available in FoamTek 60 (fine), FoamTek 30 (medium), FoamTek 20 (med-coarse), or FoamTek 16 (coarse). NOTE: Not for use with EIF Systems.
    Product Page | Product Data Sheet | SDS