StyroBond Adhesive

Product Description

StyroBond Adhesive is a non-cementitious, 100% acrylic adhesive designed to bond EPS foam to various approved substrates including wood-based sheathing. It does not require the addition of portland cement, which reduces the labor costs during application.

Basic Uses

StyroBond Adhesive is used to adhere Expanded Polystyrene (EPS) Insulation Board to various porous approved substrates including wood substrates in AkroFlex EIF Systems.
NOTE: Not for use in adhering EPS to EPS.

1. Wood-based or OSB sheathing 2. Paper-faced gypsum sheathing 3. Fiberglass mat-faced gypsum sheathing 4. Cement backer board 5. Masonry 6. Poured-in-place and/or tilt-up concrete 7. Other approved cementitious substrates

Downloadable Files

Product Data Sheet | SDS

Related products

  • Read more

    Monomix

    Polymer-Modified, Cementitious Base Coat

    Monomix is a creative plastering product consisting of portland cement, dry polymers, graded aggregates, and other proprietary additives. Monomix provides the applicator with a durable, carvable, paintable base coat ideal for creating sculpted features.
    Product Page | Product Data Sheet | SDS

  • Read more

    ColorTek Paint Grade Exterior Stucco

    Paintable Portland Cement Stucco Finish

    ColorTek Paint Grade (PG) Exterior Stucco is a premium, factory blended, Portland cement-based, stucco finish manufactured from the highest-grade Portland cement, hydrated lime, graded aggregates, and specific additives. ColorTek PG comes in various aggregate combinations that allow design flexibility and a variety of finish textures.

    The following aggregate combinations are available:
    ♦ Coarse: For heavy laced, sand, or machine dash finishes.
    ♦ 16/20: For traditional, sand, or machine dash finishes.
    ♦ 20/30: For fine texture or sand finishes.
    ♦ 30/30: For uniform fine sand finishes.

    ColorTek PG is designed to be painted and cannot be used with the ColorPak coloring system. It comes in the following grades:
    ♦ Premium Paint Grade
    ♦ Paint Grade
    Product Page | Product Data Sheet | SDS

  • Read more

    OmegaCoat Cementitious Fog Coat

    Cementitious Fog Coat

    OmegaCoat (Fog Coat) is a spray-applied cement-based, water-soluble, pigmented coating, which cures to become an integral part of the stucco surface and maintains original finish characteristics. It is an economical method to achieve color uniformity and to enhance or refresh the appearance of existing stucco.
    Product Page | Product Data Sheet | SDS

  • Read more

    AkroFlex Reinforcing

     Mesh Alkali-resistant Woven Fiber Mesh

    AkroFlex Reinforcing Meshes are alkali resistant, woven glass fiber fabrics specially designed to be used with AkroFlex EIF Systems and other approved Omega base coats. Meshes are available in a range of weights that provide different levels of strength and impact resistance.

    The following Reinforcing Meshes are available:
    ♦ Ultra Heavy Duty Mesh (20 oz): For locations needing the highest impact resistance, such as ground floors and high traffic areas.
    ♦ Heavy Duty Mesh (15 oz): For locations needing high impact resistance, such as ground floors and other higher traffic areas.
    ♦ Intermediate Mesh (11.5 oz): For locations needing additional impact resistance, such as medium traffic areas.
    ♦ Standard Mesh (4.2 oz): For locations needing standard impact resistance, such as second stories or other low traffic areas where impact is unlikely.
    ♦ Starter Mesh (4.2 oz.): For back wrapping and detail work.
    Product Page | Product Data Sheet | SDS