FoamTek

Product Description

FoamTek is a dry blend, polymer-modified, portland cement-based material specifically formulated for coating and attaching architectural EPS foam shapes to approved substrates. It is available in FoamTek 60 (fine), FoamTek 30 (medium), FoamTek 20 (med-coarse), or FoamTek 16 (coarse).

Basic Uses

FoamTek is a base coat and adhesive for attaching and coating architectural foam shapes in residential and commercial applications. It is an excellent material for automated foam coating machines. FoamTek may be used in the Omega Crack Isolation System and as a skim coat over approved substrates.

NOTE: Cannot be used in EIFS applications.

Downloadable Files

Product Data Sheet | SDS

Related products

  • Read more

    CI-Base

    Polymer-Modified Cementitious Base Coat

    CI-Base (Crack Isolation Base) is a dry blend, polymer-modified, portland cement-based material specifically formulated as base coat for embedding mesh in the Omega Crack Isolation System (CIS). NOTE: Not for use with EIF Systems.
    Product Page | Product Data Sheet | SDS

  • Read more

    Super Cement

    Premium All-purpose Plastering Cement

    Super Cement is a mixture of portland cement complying with ASTM C150 and proprietary ingredients that increase the workability and early strength of the product. Super Cement is an excellent alternative to plastic cement and meets or exceeds job site requirements for portland cement-based plaster. Super Cement is available either as fibered or non-fibered.
    Product Page | Product Data Sheet | SDS | Flyer

  • Read more

    AkroFlex Reinforcing

     Mesh Alkali-resistant Woven Fiber Mesh

    AkroFlex Reinforcing Meshes are alkali resistant, woven glass fiber fabrics specially designed to be used with AkroFlex EIF Systems and other approved Omega base coats. Meshes are available in a range of weights that provide different levels of strength and impact resistance.

    The following Reinforcing Meshes are available:
    ♦ Ultra Heavy Duty Mesh (20 oz): For locations needing the highest impact resistance, such as ground floors and high traffic areas.
    ♦ Heavy Duty Mesh (15 oz): For locations needing high impact resistance, such as ground floors and other higher traffic areas.
    ♦ Intermediate Mesh (11.5 oz): For locations needing additional impact resistance, such as medium traffic areas.
    ♦ Standard Mesh (4.2 oz): For locations needing standard impact resistance, such as second stories or other low traffic areas where impact is unlikely.
    ♦ Starter Mesh (4.2 oz.): For back wrapping and detail work.
    Product Page | Product Data Sheet | SDS

  • Read more

    Exterior E-Z Wall

    Portland Cement Stucco Finish

    Exterior E-Z Wall is a premium, factory blended, cement-based, polymer-modified, stucco finish manufactured from portland cement complying with ASTM C150, graded aggregates, and proprietary additives. Exterior E-Z Wall is used to create a paint ready surface in a textured, sand, or machine dash finish.
    Product Page | Product Data Sheet | SDS